Synthesis and crystal structures of N,2,4,6-tetra-methyl-anilinium tri-fluoro-methane-sulfonate and N-iso-propyl-idene-N,2,4,6-tetra-methyl-anilinium tri-fluoro-methane-sulfonate.

Two 2,4,6-tri-methyl-aniline-based trifuloro-methane-sulfonate (tri-fluoro-methane-sulfonate) salts were synthesized and characterized by single-crystal X-ray diffraction. N,2,4,6-Tetra-methyl-anilinium tri-fluoro-methane-sulfonate, [C10H14NH2 +][CF3O3S-] (1), was synthesized via methyl-ation of 2,4,6-tri-methyl-aniline. N-Iso-propyl-idene-N,2,4,6-tetra-methyl-anilinium tri-fluoro-meth-ane-sulfonate, [C13H20N+][CF3O3S-] (2), was synthesized in a two-step reaction where the imine, N-iso-propyl-idene-2,4,6-tri-methyl-aniline, was first prepared via a dehydration reaction to form the Schiff base, followed by methyl-ation using methyl tri-fluoro-methane-sulfonate to form the iminium ion. In compound 1, both hydrogen bonding and π-π inter-actions form the main inter-molecular inter-actions. The primary inter-action is a strong N-H⋯O hydrogen bond with the oxygen atoms of the tri-fluoro-methane-sulfonate anions bonded to the hydrogen atoms of the ammonium nitro-gen atom to generate a one-dimensional chain. The [C10H14NH2 +] cations form dimers where the benzene rings form a π-π inter-action with a parallel-displaced geometry. The separation distance between the calculated centroids of the benzene rings is 3.9129 (8) Å, and the inter-planar spacing and ring slippage between the dimers are 3.5156 (5) and 1.718 Å, respectively. For 2, the [C13H20N+] cations also form dimers as in 1, but with the benzene rings highly slipped. The distance between the calculated centroids of the benzene rings is 4.8937 (8) Å, and inter-planar spacing and ring slippage are 3.3646 (5) and 3.553 Å, respectively. The major inter-molecular inter-actions in 2 are instead a series of weaker C-H⋯O hydrogen bonds [C⋯O distances of 3.1723 (17), 3.3789 (18), and 3.3789 (18) Å], an inter-action virtually absent in the structure of 1. Fluorine atoms are not involved in strong directional inter-actions in either structure.

New type of tin(IV) complex based turn-on fluorescent chemosensor for fluoride ion recognition: elucidating the effect of molecular structure on sensing property.

A novel type of chemosensor based on tin(IV) complexes incorporating hydroxyquinoline derivatives has been designed and investigated for selectively detecting fluoride ions. Sn(meq)2Cl2 (meq = 2-methyl-8-quinolinol) (complex 1) exhibits a significant enhancement in luminescence upon the introduction of fluoride ions. This enhancement greatly surpasses that observed with Snq2Cl2 and Sn(dmqo)2Cl2 (q = 8-hydroxyquinnoline; dmqo = 5,7-dimethyl-8-quinolinol). Furthermore, complex 1 displays excellent sensitivity and selectivity for fluoride detection in comparison to halides and other anions. As a result, complex 1 serves as an outstanding turn-on fluorescent chemosensor, effectively sensing fluoride ions. The Benesi-Hilderbrand method and Job's plot confirmed that complex 1 associates with F- in a 1 : 2 binding stoichiometry. Also, complex 1 exhibited a large binding constant (pKb = 10.4 M-2) and a low detection limit (100 nM). To gain a deeper insight into the photophysical properties and the underlying mechanism governing the formation of the tin(IV) fluoride complex via halide exchange, we successfully synthesized partially fluorinated Sn(meq)2F0.67Cl1.33 (2) and fully fluorinated Sn(meq)2F2 (3), all of which were characterized through computational studies, thereby elucidating their photophysical properties. DFT studies reveal that converting Sn(meq)2Cl2 to Sn(meq)2F2, an endergonic process, leads to greater stability due to reducing steric hindrance about the metal center. Furthermore, the fluorinated complex significantly increases dipole moment, resulting in high affinity toward the F- ion.

Endothelial receptor proteins in acute venous thrombosis and delayed thrombus resolution in cerebral sinus vein thrombosis.

BACKGROUND AND PURPOSE: Cerebral sinus venous thrombosis (CSVT) is a rare but life-threatening disease and its diagnosis remains challenging. Blood biomarkers, including D-Dimer are currently not recommended in guidelines. Soluble endothelial receptor proteins (sICAM-1, sPECAM-1 and sVCAM-1) have been shown to be promising diagnostic biomarkers in deep vein thrombosis (DVT) and pulmonary embolism (PE). Therefore, we examined endothelial receptor proteins as potential biomarkers for detecting CSVT. METHODS: In this bi-centre, prospective study, we quantified D-Dimer as well as sICAM-1, sPECAM-1 and sVCAM-1 in plasma of patients with clinically suspected CSVT managed in the neurological emergency department (ED) of a tertiary care hospital. All patients underwent cerebral magnetic resonance imaging (MRI) and were followed up after 3, 6 and 12 months to detect thrombus resolution. RESULTS: Twenty-four out of 75 (32%) patients with clinically suspected CSVT presenting with headache to the ED were diagnosed with acute CSVT. These patients had a mean age of 45 ± 16 years and 78% were female. In patients with CSVT, mean baseline D-dimer (p < 0.001) and sPECAM-1 (p < 0.001) were significantly higher compared to patients without CSVT. The combination of D-Dimer and sPECAM-1 yielded the best ROC-AUC (0.994; < 0.001) with a negative predictive value of 95.7% and a positive predictive value of 95.5%. In addition, higher baseline sPECAM-1 levels (> 198 ng/ml) on admission were associated with delayed venous thrombus resolution at 3 months (AUC = 0.83). CONCLUSION: sPECAM-1 in combination with D-Dimer should be used to improve the diagnostic accuracy of acute CSVT and sPECAM-1 may predict long-term outcome of CSVT. Confirmatory results are needed in other settings in order to show their value in the management concept of CSVT patients.

Synthesis and Energetic Characterization of Borane-Amines on High-Nitrogen Heterocycles.

Borane-amines have garnered attention over the last several decades in a variety of applications, ranging from hydrogen storage materials to hypergolic fuel systems. An investigation into the synthesis of borane-amines with high-nitrogen content heterocycles was undertaken in this work. Borane-amines were formed by the reaction of BH3·Me2S in tetrahydrofuran (THF) with the requisite nitrogen-containing heterocycle and isolated by placing the crude reaction mixture in hexanes to precipitate the product. X-ray crystallography, thermogravimetric analysis (TGA), high resolution mass spectroscopy (HRMS), 1H NMR, 13C NMR, and 11B NMR were utilized for product characterization, while impact and friction sensitivity testing were conducted to identify sensitivity in the synthesized compounds. Most isolated borane-amines, except one, were found to decompose in the atmosphere and were more sensitive to mechanical stimuli than their starting materials; however, all synthesized compounds were found to be hypergolic in the presence of white fuming nitric acid (WFNA).

Direct Oxidations of meso-Tetrakis(pentafluorophenyl)porphyrin: Porphotrilactones and Entry into a Nonbiological Porphyrin Degradation Pathway.

The direct oxidations of meso-tetrakis(pentafluorophenyl)porphyrin using cetyltrimethylammonium permanganate (CTAP), RuCl3/Oxone/base or Ag+/oxalic acid each generate distinctive product mixtures that may contain, inter alia, porpho-mono-, di-, and trilactones. The CTAP and RuCl3/Oxone/base oxidations also generate a unique open chain tripyrrin derived from the degradation of a porpholactone oxazolone moiety. Thus, its formation and structure are distinctly different from all biological or nearly all other nonbiological biliverdin-like linear porphyrinoid degradation products that are derived from ring cleavages between the pyrrolic building blocks.

Sequential, Electrochemical-Photochemical Synthesis of 1,2,4-Triazolo-[4,3-a]pyrazines.

1,2,4-triazolo-[4,3-a]pyrazine was prepared via a two-step electrochemical, photochemical process. First, a 5-substituted tetrazole is electrochemically coupled to 2,6-dimethoxypyrazine to yield 1,5- and 2,5- disubstituted tetrazoles. Subsequent photochemical excitation of the 2,5-disubstituted tetrazole species using an ultraviolet lamp releases nitrogen gas and produces a short-lived nitrilimine intermediate. Subsequent cyclization of the nitrilimine intermediate yields a 1,2,4-triazolo-[4,3-a]pyrazine backbone. The scope of this reaction was explored using various tetrazoles and pyrazines. Materials produced were identified using chemical analytical techniques and computationally studied for potential application as an insensitive energetic material.

Solution and solid-state characterization of rare silyluranium(III) complexes.

A uranium(III) silylate complex [K(DME)4][UI2{(Si(SiMe3)2SiMe2)2O}] (1) was stabilized by the addition of 18-crown-6, forming [K(18-crown-6)][UI2{(Si(SiMe3)2SiMe2)2O}] (1-crown). Crystallization under multiple conditions resulted in three distinct molecular structures. Compound 1-crown was further characterized in the solution state via1H, 13C, and 29Si NMR spectroscopy, and electronic absorption spectroscopy.

Alkyl-templated cocrystallization of long-chain 1-bromoalkanes by lipid-like ionic liquids.

The serendipitous discovery of an unorthodox ionic cocrystallization system using 2-mercaptothiazolium-based ionic liquids as a crystallization milieu paves the way for the first report of crystal structures of long-chain 1-bromoalkanes. We used single crystal X-ray diffraction to determine the structures of 1-bromo-hexadecane and 1-octadecane with the aid of ionic liquids with alkyl side chains of equivalent length to the bromoalkane at room temperature. Long alkyl chains in combination with σ-hole interactions from strategically placed sulfur motifs synergistically function to crystallize the 1-bromoalkanes.

Regiodivergent sulfonylation of terminal olefins via dearomative rearrangement.

Sulfones are fascinating and highly used functional groups, but current syntheses still have limitations. Here, a regiodivergent transition metal-free approach towards sulfones [(E)-allylic sulfones and α-sulfonyl-methyl styrenes] is reported. The method employs commercially available olefins, bases, additives, solvents, and sodium sulfinates (RSO2Na) and produces adducts in good yields. Considering that up to 4 reactions (bromination, dearomative rearrangement, E2, and SN2) are happening, this approach is very efficient. The structures of key adducts were confirmed by X-ray crystallography.

Metal-Ligand Redox Cooperativity in Cerium Amine-/Amido-Phenolate-Type Complexes.

The synthesis and characterization of two cerium complexes of redox-active amine/amido-phenolate-type ligands are reported. A tripodal framework comprising the tris(2-(3',5'-di-tert-butyl-2'-hydroxyphenyl)amino-phenyl) amine (H6Clamp) proligand was synthesized for comparison of its cerium complex with a potassium-cerium heterobimetallic complex of the 4,6-di-tert-butyl-2-[(2,6-diisopropylphenyl)imino]quinone (dippap) proligand. Structural studies indicate differences in the cerium(III) cation coordination spheres, where CeIII(CH3CN)1.5(H3Clamp) (1-Ce(H3Clamp)) exhibits shorter Ce-O distances and longer Ce-N bond distances compared to the analogous distances in K3(THF)3CeIII(dippap)3 (2-Ce(ap)), due to the gross structural differences between the systems. Differences are also evident in the temperature-dependent magnetic properties, where smaller χT products were observed for 2-Ce(ap) compared to 1-Ce(H3Clamp). Solution electrochemical studies for the complexes were interpreted based on ligand- and metal-based oxidation events, and the cerium(III) oxidation of 2-Ce(ap) was observed to be more facile than that of 1-Ce(H3Clamp), behavior that was cautiously attributed to the rigidity of the encrypted 1-Ce(H3Clamp) complex compared to the heterobimetallic framework of 2-Ce(ap). These results contribute to the understanding of how ligand designs can promote facile redox cycling for cerium complexes of redox-active ligands, given the large contraction of cerium-ligand bonds upon oxidation.

Energetic Salts of a Tri-Annulated Ring System.

Energetic salts of a triazolyl-tetrazinyl-aminotriazine ring system are characterized as energetic materials. Previously known sodium, ammonium, hydrazinium, barium, and triaminoguanidinium salts as well as the parent free acid were synthesized according to literature procedures and fully characterized for the first time as energetic materials. The silver salt was also synthesized and characterized for the first time as an energetic material. Generally, these materials form hydrates that are insensitive to mechanical stimuli; however, in cases in which anhydrous materials can be obtained, high sensitivities are possible.

Physical and Electrochemical Analysis of N-Alkylpyrrolidinium-Substituted Boronium Ionic Liquids.

In this work, a series of novel boronium-bis(trifluoromethylsulfonyl)imide [TFSI-] ionic liquids (IL) are introduced and investigated. The boronium cations were designed with specific structural motifs that delivered improved electrochemical and physical properties, as evaluated through cyclic voltammetry, broadband dielectric spectroscopy, densitometry, thermogravimetric analysis, and differential scanning calorimetry. Boronium cations, which were appended with N-alkylpyrrolidinium substituents, exhibited superior physicochemical properties, including high conductivity, low viscosity, and electrochemical windows surpassing 6 V. Remarkably, the boronium ionic liquid functionalized with both an ethyl-substituted pyrrolidinium and trimethylamine, [(1-e-pyrr)N111BH2][TFSI], exhibited a 6.3 V window, surpassing previously published boronium-, pyrrolidinium-, and imidazolium-based IL electrolytes. Favorable physical properties and straightforward tunability make boronium ionic liquids promising candidates to replace conventional organic electrolytes for electrochemical applications requiring high voltages.

Halogen Bonding and/or Covalent Bond: Analogy of 3c-4e N···I···X (X = Cl, Br, I, and N) Interactions in Neutral, Cationic, and Anionic Complexes.

X-ray structural measurements and computational analysis demonstrated the similarity of the geometries and electronic structures of the X-I···N (X = Cl, Br, I, and N) bonding in strong halogen-bonded (HaB) complexes and in the anionic or cationic halonium ions. In particular, I···N bond lengths in the solid-state associations formed by strong HaB donors (e.g., I2, IBr, ICl, and N-iodosuccinimide) and acceptors (e.g., quinuclidine or pyridines) were in the same range of 2.3 ± 0.1 Å as those in the halonium ions [e.g., the bis(quinuclidine)iodonium cation or the 1,1'-iodanylbis(pyrrolidine-2,5-dione) anion]. In all cases, bond lengths were much closer to those of the N-I covalent bond than to the van der Waals separations of these atoms. The strong N···I bonding in the HaB complexes led to a substantial charge transfer, lengthening and weakening of the I···X bonds, and polarization of the HaB donors. As a result, the central iodine atoms in the strong HaB complexes bear partial positive charges akin to those in the halonium ions. The energies and Mayer bond orders for both N···I and I···X bonds in such associations are also comparable to those in the halonium ions. The similarity of the bonding in such complexes and in halonium ions was further supported by the analysis of electron densities and energies at bond critical (3, -1) points in the framework of the quantum theory of atoms in molecules and by the density overlap region indicator. Overall, all these data point out the analogy of the symmetric N···I···N bonding in the halonium ions and the asymmetric X···I···N bonding in the strong HaB complexes, as well as the weakly covalent character of these 3c-4e interactions.

Synthesis, Characterization, and Reduction of Thorium Pyridinediimine Complexes.

A family of thorium complexes featuring the redox-noninnocent pyridinediimine ligand MesPDIMe was synthesized, including (MesPDIMe)ThCl4 (1-Th), (MesPDIMe)ThCl3(THF) (2-Th), (MesPDIMe)ThCl2(THF)2 (3-Th) and [(MesPDIMe)Th(THF)]2 (5-Th) Full characterization of these species shows that these complexes feature MesPDIMe in four different oxidation states. The electronic structures of these complexes have been explored using 1H NMR and electronic absorption spectroscopies, X-ray crystallography, and SQUID magnetometry where appropriate.

Thickness control of organic semiconductor-incorporated perovskites.

Two-dimensional organic semiconductor-incorporated perovskites are a promising family of hybrid materials for optoelectronic applications, owing in part to their inherent quantum well architecture. Tuning their structures and properties for specific properties, however, has remained challenging. Here we report a general method to tune the dimensionality of phase-pure organic semiconductor-incorporated perovskite single crystals during their synthesis, by judicious choice of solvent. The length of the conjugated semiconducting organic cations and the dimensionality (n value) of the inorganic layers can be manipulated at the same time. The energy band offsets and exciton dynamics at the organic-inorganic interfaces can therefore be precisely controlled. Furthermore, we show that longer and more planar π-conjugated organic cations induce a more rigid inorganic crystal lattice, which leads to suppressed exciton-phonon interactions and better optoelectronic properties as compared to conventional two-dimensional perovskites. As a demonstration, optically driven lasing behaviour with substantially lower lasing thresholds was realized.

Synthesis and Reduction of Nitrogen-Substituted Diaryl Dihydrophenazine Diradical Dications.

A one-pot synthetic approach to form core-extended N,N'-disubstituted diaryl dihydrophenazine (DADHP) diradical dications (DRDCs) via chemical oxidation from aryl-substituted ortho-phenyldiamines is reported. The isolated N,N'-disubstituted DADHP DRDCs were reduced to their neutral counterparts with hydrazine. The model system featuring an unsubstituted fluorene aryl group, 2a, was tested as a photocatalyst for the polymerization of methyl methacrylate using organocatalyzed atom transfer polymerization (O-ATRP), which yielded a polymer with a controlled molecular weight and narrow polydispersity.

Exploring the Nature of Anion-π Interactions: Complexes of π-Acceptors with Fluoro- or Oxoanions Compared to the Associations with Halides.

The variations in the nature and properties of the anion-π complexes with different types of anions are identified via experimental (UV-vis and X-ray crystallographic) measurements and computational analysis of the associations of tetracyanopyrazine, tetrafluoro-, or dichlorodicyano-p-benzoquinone. Co-crystals of these π-acceptors with the salts of fluoro- and oxoanions (PF6-, BF4-, CF3SO3-, or ClO4-) comprised anion-π bonded alternating chains or 1:2 complexes showing interatomic contacts of up to 15% shorter than the van der Waals separations. DFT computations confirmed that binding energies between the neutral π-acceptors and polyatomic noncoordinating oxo- and fluoroanions are comparable to those in the previously reported anion-π complexes with more nucleophilic halides. Yet, while the latter show distinct charge-transfer bands in the UV-vis range, the absorption spectra of the solutions containing oxo- and fluoroanions and the π-acceptors were close to those of the individual reactants. The natural bond orbital (NBO) analysis revealed a very small charge transfer of Δq = 0.01-0.02 e in the complexes with oxo- or fluoroanions as compared to the Δq = 0.05-0.22 e found for analogous complexes with halides. These distinctions were related to the smaller frontier orbital energy gap and better overlap in the complexes with halides (since the highest occupied orbitals of these monoatomic anions are closer in energy to the lowest unoccupied orbitals of the π-acceptors) as compared to that in the multicenter-bonded associations with polyatomic oxo- and fluoroanions. In accordance with these data, the energy decomposition analysis showed that while the complexes of neutral π-acceptors with the fluoro- and oxoanions are formed predominantly via electrostatic interaction, the associations with halides comprised significant orbital (charge-transfer) interactions and they explain their spectral and structural features.

Correction: Unorthodox crystalline drug salts via the reaction of amine-containing drugs with CO2.

Correction for 'Unorthodox crystalline drug salts via the reaction of amine-containing drugs with CO2' by Mohammad Soltani et al., Chem. Commun., 2019, 55, 13546-13549, https://doi.org/10.1039/C9CC06429J.

Crystal and mol-ecular structure of 4-fluoro-1H-pyrazole at 150†K.

Only two 4-halo-1H-pyrazole crystal structures are known to date (chloro and bromo, the structure of 4-iodo-1H-pyrazole has not been reported yet). The triclinic structure of 4-fluoro-1H-pyrazole, C3H3FN2 (P ), reported here is not isomorphous with those of the chloro and bromo analogues (which are isomorphous, ortho-rhom-bic Pnma). To avoid sublimation during the measurement, diffraction data were collected at 150 K. Two crystallographically unique 4-fluoro-1H-pyrazole moieties linked by an N-H⋯N hydrogen bond are found in the asymmetric unit. Unlike the trimeric supra-molecular motifs found in the structures of the chloro and bromo analogues, 4-fluoro-1H-pyrazole forms one-dimensional chains by inter-molecular hydrogen bonding in the crystal.

Dinickel-Catalyzed N═N Bond Rotation.

Azoarenes function as molecular switches that can be triggered by external stimuli, such as heat, light, and electrochemical potential. Here, we show that a dinickel catalyst can induce cis/trans isomerization in azoarenes through a N═N bond rotation mechanism. Catalytic intermediates containing azoarenes bound in both the cis and trans forms are characterized. Solid-state structures reveal the importance of π-back-bonding interactions from the dinickel active site in lowering the N═N bond order and accelerating bond rotation. The scope of the catalytic isomerization includes high-performance acyclic, cyclic, and polymeric azoarene switches.